AgraTronix MT-PRO+ Manual De Usuario página 50

MENU SCREENS
A - The name of the menu that is currently displayed
B - The list of menu items to select from
C - The button bar indicates which buttons are active in the menu
A
B
C
GRAIN RESULTS SCREEN
A - Name of the grain tested
B - Current moisture result
C - Temperature of the grain
D - Averaged moisture result
E - Number of tests averaged
A
B
C
MOISTURE TESTING PROCEDURE
1. Remove cap and inspect test cell to be sure that it is clean and empty.
2. Press the "POWER" button to turn on tester.
3. When the grain to be tested has been selected by using the "UP OR DOWN"
buttons, fill the test cell even to the top.Use finger to level grain inthe test cell.
4. Replace cap and tighten until pressure-indicator screw is flushwith the top of cap.
5. Press the "ENTER" button to start measuring. Once the test is complete the
moisture %, temperature and the average moisture will be displayed.
6. Once a test has been taken empty the test cell.
NOTE: For best results always take at least three tests and use the average of the
results as the grain samples moisture.
MT PRO PLUS manual_short version_SE_Agratronix.indd 50
Operation
Big Font
E D
49
EN
Small Font
2.4.2015 16:21:39