Descargar Imprimir esta página

Imit SILVER TA/RF S Manual De Instrucciones página 14

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 43
INSTALLATION
ROOM THERMOSTAT PLACEMENT
Room Thermostat needs to be placed in the room which is used most frequently. For
instance; living room or lounge. Placing the Room Thermostat in a spot that have air
circulation like entrance of a room or side of window should be avoided. Also anywhere
close to heating/cooling units such as radiator, stove and spots which get direct sun
lights would not be suitable. Room Thermostat needs to be located above the floor 150
cm height. Few trials may be made to find the most convenient spot.
Warning! It is recommended to install the thermostat scrupulously complying with the
safety standards and legal provisions in force. Before making any connections, make
sure that the main switch has been turned off.
BATTERY PLACEMENT
As shown in the picture above, press the screwdriver forward from the space shown,
bend the tabs and separate the front cover. Insert 2 new AAA alkaline batteries in the
battery housing with the correct battery direction. Replace both batteries at the same
time. Then align the front part of your Room Thermostat to the back and squeeze it
towards the back.
Low Battery Warning: When the "
" icon appears on the screen, it means "low battery
warning". It is recommended to replace the batteries when this warning appears.
Warning: When the product is not used for a long period (more than 15 days), remove
the batteries. Otherwise, malfunctions that may occur would be out of warranty.
Please throw your dead batteries into the waste bin for batteries.

Publicidad

loading

Productos relacionados para Imit SILVER TA/RF S

Este manual también es adecuado para:

Silver ta s