Imit SILVER TA/RF S Manual De Instrucciones página 16

RECEIVER SETUP
First, shut down your heating/cooling unit and your heating/cooling unit's power source
with all electrical current (fuse, socket etc.)
As shown in the connection diagram, connect one end of the heating/cooling unit
connection cable to the COM and the other to the NO input of the Receiver.
Connect the other ends of the cable -which you connected to the Receiver to room
thermostat connection terminal as shown in your heating/cooling unit's user manual.
You must first connect the Receiver power cable to the Receiver and then to the fuse to
which the heating/cooling unit is connected.
After completing the cable connection process, firstly turn on your fuse and then your
heating/cooling unit.
By pressing the Receiver's manual usage button for 2 seconds, you should see the
Orange Light blinking on the Receiver. In this way, after making sure that the heating/
cooling unit is operating, press the same button again for 2 seconds and see that the
Orange LED turns off.
Set up the Room Thermostat to pair the Receiver with the Room Thermostat.
RECEIVER WIRING DIAGRAM HEATING/COOLING UNIT
Warning!
Operations within the heating / cooling unit or the electrical installation must be carried
out by professionally qualified persons. PAIRING THE ROOM THERMOSTAT AND THE