Metabo HPT SV 12SG Instrucciones De Seguridad Y Manual De Instrucciones página 10

English
6. Installing the sanding paper
(1) Peel off the paper on the backside of the
quick stick sanding paper.
Since adhesive agent is applied on the
paper on the backside of the quick stick
sanding paper, make sure that it is not
exposed to dust or other particles. Fig. 2.
(2) To attach the quick stick sanding paper,
match its holes to the holes in the quick
stick rubber pad.
NOTE:
Wipe off any dust or oil on the pad before
attaching the sanding paper to it.
(3) Surely attach the quick stick sanding paper
by strongly and evenly pressing with your
palm. (Fig. 4)
NOTE:
If you reattach the quick stick sanding
paper several times, its adhesive strength
will become lowered. Please try to attach it
only once.
7. Attaching and removing the dust bag
(1) Attaching the dust bag
As shown in Fig. 5, hold the dust gate and
push it in the direction of arrow A to attach
it to the dust outlet.
(2) Removing the dust bag
As shown in Fig. 5, hold the dust gate and
pull it in the direction of arrow B to remove it
from the dust outlet.
10
Paper on backside
Fig. 2
Quick stick
sanding paper
Fig. 3
Press strongly
Fig. 4
A
B
Dust outlet
Fig. 5
Quick stick
rubber pad
Dust bag
Dust gate