Metabo HPT SV 12SG Instrucciones De Seguridad Y Manual De Instrucciones página 14

English
[4-3/8" × 4" (110 × 100 mm) sanding paper (Velcro type)]
(1) Match the holes in the sanding paper (Velcro type) to the holes in the sponge pad (velcro
type).
(2) Surely attach the sanding paper (Velcro
type) by strongly and evenly pressing with
your palm. (Fig. 12)
[5" (125 mm) quick stick sanding paper]
Attach the quick stick sanding paper to the 5" (125 mm) round rubber pad in the same way as
shown in "6. Installing the sanding paper" on page 10.
3. Opening holes in the sanding paper
with the punch plate
Dust collecting capacity will improve if
the punch plate is used to open holes in
sanding paper without holes.
14
Sanding paper (Velcro type)
Punch plate
Sponge pad
(Velcro type)
Fig. 11
Press strongly
Fig. 12
Fig. 13