Blocks PRO 30 Manual De Mantenimiento página 31

02
Change Full Head
02.5 Replace print head
2.5.1. Remove the print head from the machine;
2.5.2. Insert the new printhead.
2.5.3. Screw the head.
2.5.4. Fit the cap.;
2.5.5. Screw the cap.
02.6 Connect plugs and tube
2.6.1. Connect the plugs.
2.6.2. Insert the tube and connect the plugs.
(See page 35, 3.5 and 3.6 to Insert the tube)
Attention: When connecting the plugs, pay attention to the polarity.
MANUAL DE MANUTENÇÃO
PRO 30 31