Descargar Imprimir esta página

riptunes RACR-510BT Guia Del Usuario página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Handle: Collapsible carry handle
2. Speakers
3. Cassette Tape Door
4. LED Panel: During music playback, 10 LEDs on the panel will indicate the
music level in real-time
5. Telescopic antenna (for FM/SW1/SW2 radio)
6. Tone and Volume knobs: Adjust the bass and volume
7. Tape transport buttons: Stop, Play, Fast Forward, Rewind, Record
8. Microphone: Record your voice to tape or USB/SD Media
9. Mode Switch
Off/Tape: Play cassette tapes
BT/TF/USB: The "BT" (Bluetooth) Light will be on when this mode is
selected. This mode plays back audio wirelessly from Bluetooth devices,
USB Media or SD (Also known as "TF") Cards.
Radio: Allows radio playback
10. Band (in Radio mode): Set the band for Radio Playback (FM/AM/SW1/SW2)
11. Tuning Knob: Manual Tuning for Radio Stations
12. MicroSD and USB MP3 Play controls
Mode / Dir Button: Cycle through folders on the USB/SD Media
Prev: Go to previous track; long-press to fast reverse
Next: Go to next track; long-press for fast forward
Play / Pause / REC
13. Repeat/Delete Press once to repeat current song; press twice to repeat all songs.
14. MicroSD and USB Ports
15. AUX IN: You can connect a mobile device or audio source that uses a
3.5mm (1/8") cable here. Playback will switch to AUX automatically when
plugged in.
16. Headphones (  ): You can connect headphones or earbuds here. The
main speakers will be disabled while headphones are connected.
17. AC Input: Connect the power cable here (see below).
BATTERY INSTALLATION
(BATTERIES NOT INCLUDED)
The boombox takes 4 D batter-
ies. It also plugs into the wall
with the AC cable provided.
To install batteries into the boom-
box, open the battery cover on
the back of the boombox). Then,
match the "+" and "–" signs with
the batteries. Replace the battery cover. If the boombox unit is not used for an
extended period of time, remove the batteries before storing it.
–7–
17

Publicidad

loading