Descargar Imprimir esta página

riptunes RACR-510BT Guia Del Usuario página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

cessful, the blue indicator light stops flashing and you can now play audio
from your mobile device through the boombox.
During playback, press the PREV button (on the side of the boombox) to
skip to the previous song. Press the NEXT button to skip to the next song.
Press the play/pause button to pause/continue playback.
3. Long press the PLAY/REC button to disconnect the Bluetooth connection.
You will hear a disconnection sound. Long-press the PLAY/REC button to
reconnect with the Bluetooth device that was last paired.
AUX IN (AUXILLARY INPUT):
You can connect this 3.5mm input jack to an audio source, such as an mp3
device with a headphone output. When a device is connected to this jack,
it will override anything else that is playing back, and you will only hear
what is connected to the AUX IN jack.
USB/SD CARD PLAYBACK AND RECORD
To Playback from USB or SD cards: Set the function switch to the BT/USB/
SD position, insert the USB drive or SD card to be played, and the machine
will automatically play the tracks on that media.
During playback, press the PLAY/REC button to (on the side of the boom-
box) pause/continue playing. Press the PREV button to skip to the previous
song. Press the NEXT button to skip to the next song.
MODE/DIR: During playback, press the MODE/DIR button to cycle
through the selection of music folders on the media.
Repeat mode: During playback, press the REP/DEL button to cycle to
toggle the repeat playback mode: loop all —> single loop —> loop all
The blue LED will correspond to the mode chosen.
Delete function: During playback from the USB or SD card, long press
the REP/DEL key to delete the current track.
Recording to USB/SD: You can record Radio, Tape and Aux In to USB/
SD. With the Mode set to Radio or Tape (or with an Aux device plugged in),
Long-press the PLAY/REC button to start recording. During the recording,
the blue LED flashes quickly. After the recording is completed, press the
PLAY/REC button to stop recording. The recording file will be automatically
saved to USB or SD. If you then switch the mode to BT/TF/USB and press
MODE/DIR, the track just recorded will be played automatically.
Microphone Recording to USB/SD: With the MODE set to BT/TF/USB,
Long-Press the PLAY/REC button to start recording. During the recording
process, the blue LED flashes quickly. Press the PLAY/REC button again to
stop recording. The recording file will be automatically saved, and the new-
ly recorded track will be automatically played afterward.
Note: If a USB Drive and SD card are inserted at the same time, USB will have
priority. Additionally, this model does not record Bluetooth audio to USB or SD.
–9–

Publicidad

loading