Tripp-Lite B021-SWHD-K Manual De Instrucciones página 4

Installation
Standard Rack Mounting
1
Attach the left and right mounting brackets to the back of the rack.
Use the included four screws to secure the mounting brackets into
place.
2
Insert the KVM by sliding its left and right side bars into the mounting
brackets. Use one person to hold the weight of the KVM and a
second person to install four screws in the front tabs to secure to the
front of the rack.
Note: Allow at least 2 in. (5 cm) on each side for proper ventilation, and at least
5 in. (12.7 cm) at the back for the power cord and cable clearance.
1 2
4