Tripp-Lite B021-SWHD-K Manual De Instrucciones página 6

Operation
1
Opening the Console: Pull the release bar on the upper handle.
Slide the console module out until it clicks into place, then raise the
LCD module lid.
2
Closing the Console: Lower the LCD module until it lies flat, then
slide the full console in.
Hotkeys
Press the keys in sequence one key at a time; first [Ctrl], then [Alt], then
[Shift], etc.
Combination
[Ctrl] [Alt] [Shift] [P] [C] [Enter]
[Ctrl] [Alt] [Shift] [M] [A] [C] [Enter]
[Ctrl] [Alt] [Shift] [S] [U] [N] [Enter]
[Ctrl] [Alt] [Shift] [u] [p] [g] [r] [a] [d]
[e] [Enter]
[Ctrl] [Alt] [Shift] [L] [Enter]
[Ctrl] [Alt] [Shift] [R] [Enter]
[Ctrl] [Alt] [Shift] [L] [R] [Enter] or
[Ctrl] [Alt] [Shift] [R] [L] [Enter]
1
Action
To select normal mode (PC, etc.).
To select Mac.
To select Sun.
Activates the Firmware Upgrade
Mode.
Note: This Hotkey sequence only
works when the Firmware Upgrade
Recovery Switch is in the Normal
position.
Enable Local (LED-backlit LCD)
console; Disable Remote (external)
console.
Enable Remote (external) console;
Disable Local (LED-backlit LCD)
console.
Enable both consoles (default).
6
2