cecotec GRANDHEAT 3010 Manual De Instrucciones página 45

The microwave door must be closed to operate.
-
In case there is any manufacturing rests in the microwave cavity or on the heating elements,
-
leave the microwave open to ensure good ventilation. In such case, it is recommended to
heat a glass of water at high power for several times.
Warning
Do not try to remove the mica plate. This component is essential for the proper functioning of
the device. This plate must be clean to ensure its proper operation.
3. OPERATION
Connect appliance to power outlet. Before connecting it, make sure the timer is set on Zero
-
position.
Do not block the microwave ventilation screen.
-
- Open the door by pulling it and the light will automatically turn on.
- Place the food on the rotary plate and close the door. Food must be placed on a container,
never directly on the rotary plate.
Select the power level by turning the power knob (next, there is an explanation for every
-
level).
Set the timer by turning the knob to the desired time.
-
- Once the timer is set the microwave will start operating and the interior light will turn on.
If pausing is needed during operation, open the door at any time. Once the door is closed
again, the product will start operating again.
When the timer stops, a bell will ring, and the interior light will automatically turn off. If
-
food is removed from the microwave before the bell rings, make sure you put the timer
back to the zero position to prevent it from running while empty.
Note
The device's light will automatically turn on when opening the door and when it is operating.
When the door is closed and the device is not being used, the light will be off.
Warning
When removing food from the microwave, make sure the timer is in the 0 position, as, if not,
the microwave could be used without food on its inside and this could damage the internal
components.
GRANDHEAT 3010/GRANDHEAT 3020
GRANDHEAT 3030/GRANDHEAT 3040 MIRROR
GRANDHEAT 3050 /GRANDHEAT 3060 MIRROR
ENGLISH
45