IROAD QX2 Guía Rápida página 4

※
Do not arbitrarily disassemble and modify the product.
It should be considered user's fault and it will void the warranty.
※
Do not handle the product while driving, it can cause serious accidents.
(Please operate the product in a safe place after parking.)
※
Turn recorder off when exposed to direct sunlight or used for too long.
Otherwise, malfunction or breakdown will occur.
※
Do not remove SD card or turn off the power cable during the firmware update.
It may cause malfunction or loss of data.
※
Use of genuine IROAD memory card is recommended.
Failure to use genuine SD card may cause error or malfunction.
※
Real-time recording and playback via Wi-Fi could be delayed depending on the
specifications of your smart device.
※
Motion detection is initiated by an image sensor software.
Errors may occur depending on the surrounding environment and the voltage of the car.
※
If the GPS signal is good, ADAS will activate when the speed of the car is above the set
speed. The surrounding environment may cause errors.
※
Unauthorized connection of the uninterrupted power cable may cause malfunctions.
Connections must be different depending on the power type of the vehicle.
(Please contact a professional engineer if you need help to install it)