IROAD QX2 Guía Rápida página 63

※
Do not arbitrarily disassemble and modify the product.
It should be considered user's fault and void the warranty.
※
Do not handle the product while driving, it causes some serious accident.
(Please operate the product in safe place after parked.)
※
Turn recorder off when exposed to direct sunlight or used for too long.
Otherwise, malfunction or breakdown would occur.
※
Do not remove SD card or turn off the power cable during the firmware update.
It may cause malfunction or loss of data.
※
Use of genuine IROAD memory card is recommended.
Failure to use genuine SD card may cause error or malfunction.
※
Real-time recording and playback via Wi-Fi could be delayed depending on specification
of smart device.
※
Motion detection is initiated by an image sensor software.
Errors may occur depending on the surrounding environment and the voltage of a car.
※
If the GPS signal is good, ADAS will activate when the speed of the car is above the set speed.
The surrounding environment may cause such errors.
※
Unauthorized connection of the uninterrupted power cable may cause malfunctions.
Connections must be different depending on the power type of the vehicle.
(Please contact professional engineer if you needs to install it)