Amemo A320 Manual Del Usuario página 14

Restore

With the "*" symbol next to "Restore", long press the direction button.
This will change to "OK", which restores the device to factory settings.
Demo

With the "*" symbol next to"Demo", long press the direction button to
turn Demo mode on/off.
Brightness

With the "*" symbol next to "Brightness", long press the direction
button to change the Brightness value on a scale from 1 to 5.
3.1.2 Limit Value Setting
With the "*" symbol next to "Reminder Setup", long press the direction
button until the "Limit Setup" menu appears (figure 3.3.2). You can
then press the direction button to select the items. Press the direction
button for 1 second to change to the data you need.
Remind Setup
Sound Reminder
Beep
Demo
Restore
Brightness
Figure 3.3.1
On the "Limit Setup" menu page (figure 3.3.2),with the "*" symbol next
to "+/-", press the direction button for 1 second to change the "+" to "-"
or change the "-" to "+".
When "+" shows on the right side, by pressing the direction button for
1 second and moving the "*" next to the Spo2 Hi or PR Hi setting, you
can increase the value to a higher value (until it reaches the
*
on
off
on
OK
4
Exit
Limit Setup
SpO2 Hi
SpO2 Lo
PR Hi
PR Lo
+/-
Figure 3.3.2
11
*
100
94
130
50
+
Exit