Kobalt KJR 1040-03 Manual De Instrucciones página 10

OPERATING INSTRUCTIONS
3. To Use Supplied AC Power Adaptor
Insert the AC power adaptor plug into the DC
Socket (T) on the back of the radio. Plug the
adaptor (V) into a standard power outlet. Whenever
the power adaptor (V) is connected, the battery
pack is automatically disconnected. The AC adaptor
(V) should be disconnected from the power outlet
when not in use.
NOTE: The battery pack cannot be charged using
the power adaptor (V). The battery pack can only
be charged using chargers specified earlier in this
manual.
NOTICE: Always close the rubber cover (Q) after
each use to protect the ports from dust, dirt, and
moisture.
4. To Connect an External Player to AUX Input
Port
a. Select the AUX operating mode using the mode
button (D).
b. Insert the AUX cable (W) into the AUX input
port (S) and make sure that they are properly
connected.
c. Connect an MP3 player, CD player, or other
audio device directly to the unit, using the AUX
cable (W).
d. Switch on the external audio device and start
the playback.
e. Adjust the volume with the regulator on the
external audio device or the volume buttons of
the unit.
NOTE:
• The AUX port is for INPUT only. Do not connect headphones or speakers.
• Batteries of the connected devices cannot be charged via the AUX connection.
• The unit will turn off automatically 1 hour after the AUX cable is disconnected (or never
connected) from the AUX input port.
NOTICE: Always close the rubber cover (Q) after each use to protect the ports from dust, dirt,
and moisture.
3
4
10
T
V
W S
Q
Q