Kobalt KJR 1040-03 Manual De Instrucciones página 13

OPERATING INSTRUCTIONS
10. Bluetooth Operating Mode
®
Press the mode button (D) several times until the
BT (Bluetooth ) mode is active or briefly press
®
the Bluetooth-pairing button (H) to go straight into
Bluetooth mode.
The Bluetooth icon flashes when BT mode is active
but no Bluetooth device is connected/paired.
To pair (connect) a Bluetooth device, activate the
Bluetooth function on the device to be connected
(smartphone or similar) and select "Kobalt 40V
HRBS 1040-03" as the target of the Bluetooth con-
nection. Refer to the operating manual of the paired
device for more information. The Bluetooth icon
stays on after a device is connected successfully.
Single press the '<<' button (G) or '>>' button (E) to
change to previous or next song. Press the
To disconnect (forget) the Bluetooth device after successful pairing, press the Bluetooth-pairing
button (H) and hold for 3 seconds. The paired device is disconnected.
NOTE: When in Bluetooth operating mode, the unit will turn off automatically 1 hour after being
disconnected from a paired device or never being paired with a Bluetooth device.
11. To Connect Two KJR 1040-03 Units Using
Bluetooth TWS
®
Two KJR 1040-03 units can be connected using
Bluetooth to become a TWS (True Wireless Ste-
®
reo) system.
a. Turn two units on and set both units to
Bluetooth mode .
b. Briefly press the Bluetooth button (H) again
on one of the units, this unit will automatically
connect to the other, the previous unit that
displays the upper radio icon will act as the
'host' unit, the other as a secondary speaker.
NOTE: When the unit is in the TWS system,
the upper radio icon
icon will stay on when the two units connect
successfully.
c. The secondary unit will play back whatever audio content is playing on the 'host' unit, when
the audio source is connected via Bluetooth.
will flash, the two radios
10
button (F) to pause or play.
11
The unit is in the TWS system
The two units connect successfully
13
AM
G F E D
AM