Wesco WS2938 Manual Del Usuario página 16

SYMBOLS
To reduce the risk of injury, user must read
instruction manual
Warning
Wear ear protection
Wear ear protection
Wear dust mask
For indoor use only
Do not expose to rain or water
Do not burn
Fuse
Double insulation
Positive terminal
Negative terminal
Do not dispose of batteries, Return exhausted
batteries to your local collection or recycling
point.
16
OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal and plastic.
BEFORE PUTTING INTO OPERATION
CHARGING THE BATTERY PACK (SEE FIG. A)
NOTE:
a) Do not use any charger other than that specifically
provided for use with the equipment.
b) If the battery pack is very hot you must remove your
battery pack from the charger and allow time for the
battery to cool down before recharging.
c) The battery in your new tool is not charged when it
leaves the plant. Therefore it must be full charged
before using the first time.
d) Please charge the battery to reach full or no less than
half charge before storage. If the tool will not be used
for long periods of time, charge the battery every 3-6
months.
1) Plug the charger into an appropriate outlet.
2) Place the battery pack into the charger.
3) When charging is completed, unplug the charger and
remove the battery pack.
NOTE: If the battery pack is locked in the
charger, press the battery pack release
button and remove it.
WARNING: When battery charge runs
out after continuous use or exposure to
direct sunlight or heat, allow time for the
battery to cool down before re-charging to
achieve the full charge.
CHARGING INDICATOR
Light ON/OFF
Red on
Green on
Status
Charging
Fully Charged
EN