Selco BOX BASIC RI 3000 Interbus Instrucciones De Uso página 42

1/2 INTERBUS (IN/OUT) CONNECTOR
IN OUT
Pin Signal
Housing PE
1 DO1 Digital outputs
2 DI1 Digital inputs
3 GND
4 Not used
5 Not used
6 DO1 Digital outputs (reverse)
7 DI1 Digital inputs (reverse)
8 Not used
9 Not used
3 BAUD RATE SWITCH
2Mbit/s
4 STATUS INDICATORS
A
GREEN Normal operation
B
GREEN Bus online
C
YELLOW Bus not online (or no power)
D
YELLOW Data exchange possible
Consul the site: http://www.anybus.com/support/support.asp?PID=81&ProductType=Anybus-S,
Document: Design Appendix ABS Interbus
42
The module supports three different types of connectors; 9-pin d-sub, screw terminal,
and 2mm board-to- board. The 9-pin D--sub is the standard connector and is recom-
mended for data transfer rates higher than 1500kbit/s. This connector is also recom-
mended by the INTERBUS standard IEC 61158.
500kbit/s