Descargar Imprimir esta página

IKRA ILH 3000 A Instrucciones De Manejo página 21

Ocultar thumbs Ver también para ILH 3000 A:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
• Do not use a power tool with a damaged switch.
A power tool that cannot be switched on or off
any more is dangerous and must be repaired.
• Pull the mains plug and/or remove the battery
before adjusting a tool, changing accessories
or putting the tool aside. This precaution
avoids the unintentional start of the tool.
• Store power tools that are currently not used
out of the reach of children. Do not allow per-
sons to use the tool if they are not familiar with
the tool or these instructions. Power tools are
dangerous if used by inexperienced persons.
• Thoroughly maintain your power tool. Check
whether moving parts are working properly
and are not jamming/sticking, and whether
parts are broken or otherwise damaged in a
way that may affect the function of the power
tool. Have damaged parts repaired before us-
ing the tool. Many accidents are the result of
poorly maintained power tools.
• Keep cutting tools sharp and clean. Thorough-
ly maintained cutting tools with sharp cutting
edges are jamming less often and are easier
to guide.
• Use power tools, accessories, add-on tools,
etc. in accordance with these instructions and
in the way prescribed for the respective type
of tool. You should also consider the working
conditions and the work to be carried out. The
use of power tools for purposes other than
those intended for the respective tool may
result in dangerous situations.
1.5 Service
• Have the power tool serviced by qualified tech-
nical personnel only; repairs should be carried
out using exclusively original spare parts. This
will ensure the continued safe operation of the
power tool.
2. Safety Instructions for the Garden Shred-
der
• Wear protective gloves, glasses, and ear pro-
tection. Do not wear loose-fitting clothing.
• Always position the unit so as to be secure and
balanced. Do not lean on the unit.
• The machine must be located on an even, sta-
ble surface during operation.
• Before using, ensure that all screws and nuts
are tightly fastened.
• Only use in dry conditions and never during
rainy weather.
• Do not use the machine with damaged pro-
GB | Operating Instructions
• Keep hands, other body parts and clothing well
• • Never place your face or other body parts in
• Do not leave the machine unattended. Shut off
• Do no feed any hard objects into the funnel
• If the machine becomes blocked: shut off the
• If the fuse has blown or the overload protec-
• Do not pull on the extension lead. Do not make
• Always keep the extension lead away from the
• If the cable is damaged, it must be replaced by
• Never move the machine by pulling the cable.
• Before using the shredder for the first time it
• Only use extension leads which are suitable
• Before using the unit ensure that there is no
• Always shut down the shredder before unplug-
• Keep children and animals away from the
• Children or individuals who have not read
• The user of the device is responsible for third-
• The shredder may only be used for its intended
GB-3
tective equipment or without protective equip-
ment.
away from the feeding funnel and the ejection shaft.
the proximity of the feeding funnel.
the motor and unplug the unit.
such as stones, bottles, cans or pieces of met-
al. This could damage the machine.
motor, unplug the unit, remove all objects from
the machine and check it for damages.
tion has been triggered, this means that the
machine was overloaded and/or that too many
devices are connected to the same extension
lead. Look for the cause and fix the problem.
Do not install a stronger fuse.
the lead too tight. This could damage the plug
or the cable insulation. This type of damage
may not be visible, but can be dangerous.
machine. Remove the plug from the socket
and check the cable regularly for signs of dam-
age or aging. Do not use the machine with a
damaged extension lead.
a specialist in order to prevent accidents.
Do not move the machine while the motor is
running.
must be assembled properly.
for the outdoors.
damage to/problems with the cable.
ging the cable and/or extension lead.
shredder. All others must keep a safe distance
from the shredder when it is operating.
these instructions or who are not familiar with
the shredder may not use the device.
parties during operation.
purpose.

Publicidad

loading