Mettler Toledo VFS120 Manual De Instrucciones página 25

Accumulation can only be started when the terminal is in basic weighing
mode. If one of the applications is active, "—no—" (Figure 5-1) will be
shown.
Figure 5-9: Collecting value symbol
The procedure for accumulation is as follows:
1. Put the first weight on the platform and press the "accumulation"
function key . If the stable weight is detected within 2 seconds, the
grand total value will be 1.5 kg and number will be 1 (Figure 5-9).
2. Each time the new weight is put on the platform, press the
accumulation key to add the new value to the total.
3. Press and hold the function key to display the total value (Figure 5-10,
left). Note that when the accumulation or count is displayed, the
Accumulation icon
"Count", or number of values appears (Figure 5-10, right). Each time
the "accumulation" key is pressed, the display will switch between
count and sum.
Figure 5-10: Collecting value symbol
4. Press the key to exit accumulation and return to basic weighing
mode.
will blink. Press the function key briefly, and the
25