MeisterCraft MEF 600 Manual De Instrucciones página 39

5461050-Fliesensch-man
GB
Operating instructions & safety hints
Please read these operating instructions before using the tool for the
first time and keep them with the tool at all times.
Contents
1 – Scope of delivery
2 – Technical information
3 – Components
4 – Correct use
5 – General safety
instructions
6 – Safety instructions
relating specifically to
the equipment
1 – Scope of delivery
• Slab & Tile Cutter
• Protective hood
• Angled stop
• Parallel stop
• Water reservoir
• 2 x Tool
• Operating Instructions
• Guarantee
2 – Technical information
Technical data
Power supply
Nominal power
requirement
Protection class
Idling speed (rpm)
Work support plate
Diamond cutting wheel
Blade location hole
Max. cutting depth
Lead
Technical changes reserved.
12.03.2007 13:34 Uhr
10 – Maintenance and
11 – Service instructions
Noise emission/vibration
L
3 – Components
230 V~/50 Hz
600 W/S2-10 min
IP20
–1
2950 min
330 x 360 mm
4 – Correct use
Ø 180 x 2,2 mm
25,4 mm
35 mm Cutting of ceramic, stoneware, natural
200 cm stone and thin concrete slabs up to a
maximum thickness of 35 mm. Use the
tool, cutters and accessories for the
Seite 39
7 – Installation and setting
8 – Operation
9 – Mode of operation
environmental
protection
: 63,3 dB(A), L : 76,6 dB(A).
PA WA
1 ON/OFF switch
2 Lead
3 Protective hood
4 Cutting wheel
5 Protective hood
6 Parallel stop
7 Marking for mitre cutting
8 Fixing screws for parallel stop
9 Fixing screws for mitre setting
10 Scale for parallel cuts
11 Work bench
12 Water reservoir
13 Angled stop
39