MeisterCraft MEF 600 Manual De Instrucciones página 41

5461050-Fliesensch-man
protectors, depending on the kind of
power tool and the use to which it is
put, reduces the risk of injury.
• Avoid starting the tool up
accidentally. Make sure that the
switch is set to „OFF" before
inserting the plug in the socket. If
your finger is on the switch when
carrying the appliance or you connect
the appliance to the power supply
while it is switched on, accidents may
result.
• Remove adjusting tools or spanners
before switching on the appliance.
Tools or spanners left in rotating parts
of the appliance may cause injury.
• Do not overestimate yourself. Make
sure you are on a safe footing and
always keep your balance. That way
you can better control the appliance
in unexpected situations.
• Wear suitable clothing. Do not wear
loose-fitting clothing or jewellery.
Keep hair, clothing and gloves away
from moving parts. Loose clothing,
jewellery or long hair can get caught
in moving parts.
• If dust extracting and catching
equipment is fitted, make sure that
it is connected up and correctly
used. Use of this equipment reduces
dust hazards.
Careful handling and use of power
tools
• Do not overload the appliance. Use
for your work the power tool intended
for it. Using the correct power tool
will enable you to work better and
more safely in the specified power
range.
12.03.2007 13:34 Uhr
• Never use a power tool which has a
• Unplug the appliance from the
• Keep power tools out of the reach
• Look after the appliance properly.
• Keep cutting tools sharp and clean.
• Use power tools, accessories,
Seite 41
defective switch. A power tool which
cannot be switched on and off is
dangerous and must be repaired.
mains before adjusting it, changing
attachments or putting it aside. This
precaution ensures that the appliance
will not be started accidentally.
of children, when they are not in use.
Do not permit persons to use the
appliance, if they are not familiar with
it or have not read these instructions.
Power tools are dangerous, if used by
inexperienced persons.
Check that moving parts are
operating properly and are not
sticking and that no parts are
broken or so badly damaged as to
prevent the appliance from operating
properly. Have damaged parts
repaired before using the appliance.
Many accidents are caused by badly
maintained power tools.
Carefully maintained cutting tools
with sharp cutting edges jam less
frequently and are easier to control.
attachments, etc., in accordance
with these instructions and the
specifications for an appliance of
this particular type. Also take into
consideration the working conditions
and the work to be done. The use of
power tools for any application other
than those for which it is intended
may result in dangerous situations.
41