Descargar Imprimir esta página

Garland 1080 QG-V23 Manual De Instrucciones página 43

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

BLADE
7.2.7. REPLACING THE COUNTER BLADE
When the cutting edge is worn, it must be replaced
with a new one.
The space between the blade and the counter blade
should always be 1mm.
COUNTER BLADE
43/148
7.2.8. BELT ADJUSTMENT
Remove the cap that covers the belt.
1. Loosen the nuts (3) and (1)
2. Screw in the bolts (4) evenly to remove the tension
plate (2) to move the motor.
3. Belt tension will increase with motor movement.
4 If you need to loosen them, move the engine block
backwards.
5. The belts will have the correct tension when they
can be flexed +/- 9 mm.
5. After adjustment, make sure you have all bolts and
nuts in the correct position and tight.
English

Publicidad

loading