Publicidad
Idiomas disponibles
Idiomas disponibles
PROGRAMMING CONTINUED
Setting Watering Days
Press the
button until the
1.
2. The program letter (A, B, or C) will be displayed.
3. Arrows point at the speci c days of the week on which watering
or
will occur. Press the
4. Press the
button to activate that day for the program displayed, or
the
button to cancel watering for that day. The arrow will show
on the watering days for the active program.
5. Press the
button to set days to water for a di erent program, if
desired.
6. Press the
button to proceed to the next programming function
or allow controller to return to idle mode.
Selecting Odd/Even Days to Water
This feature uses numbered days of the month for watering instead of
speci c days of the week.
1.
Press the
button until the
2. Press the
button until the cursor is above either ODD or EVEN
on the display.
3. Press the
button to select, or the
ODD or EVEN days to water.
4. Once ODD or EVEN mode is activated, it will be the only cursor
shown on the display.
9
icon is displayed.
buttons to scroll though the days.
icon is displayed.
button to cancel either
Selecting Interval Days to Water
1.
Press the
button until the
2. Press the
button until the cursor is above INT on the display.
3. Press the
button and a 1 will be ashing, indicating the number
of days between watering.
4. Press the
or
buttons to select the number of days between
watering days (1 to 31).
Setting the Seasonal Adjustment
1.
Press the
button until the
2. Press the
or
button to increase or decrease the seasonal
adjustment value from the default 100% (down to a minimum of
10% or a maximum of 150%).
3. The value programmed for seasonal adjustment will be applied to
all irrigation programs and will immediately be re ected in
the run times displayed. For example, if 20-minute run times are
programmed and then the seasonal adjustment is changed from
100% to 50%, the run times displayed will be 10 minutes.
EN
O
icon is displayed.
INT
is displayed.
Publicidad
