Powersmart DB5021LED Manual De Instrucciones página 6


Body position-Maintain proper footing and balance at all times. Place heels firmly on the ground and tightly
grasp the handle bar. Watch for uneven surfaces and do not over reach. In case you fall or collide with the snow
thrower, inspect the unit for damage. When steeping backwards, be careful to avoid obstacles beneath your feet
or behind you to avoid falling.

Snow Thrower Use and Care

Know your snow blower-Familiarize yourself with the main parts of your snow thrower. Read the operators
manual carefully. Learn your snow throwers applications and limitations as well as specific potential hazards
related to this machine. Do not use this machine for any purpose other than one for which it was designed.
Otherwise, it may cause mechanical defaults, serious damage or personal injury.
 Preliminary unit inspection –Thoroughly inspect the unit before use. Make sure all the parts are secure and
installed correctly. If you notice any abnormalities, do not use the machine until it has been properly repaired.
Always perform a test run the first time you use the snow thrower or after replacing parts to ensure that unit is
functioning properly.

Preliminary area inspection-Clear the area to be plowed before each use. Remove all objects such as rocks,
broken glass, nails, wire, or string which can be thrown by or become entangled in the snow thrower .Keep the
area of operation clear of other people and pets.

Excessive force –The snow thrower was designed to respond at a certain rate for various snow conditions for
optimum safety band performance. Do not force it; keep pressure constant.

Malfunctioning switch-Do not use the snow blower if the switch does not turn it on and off. Any electrical
appliance that can not be controlled by the switch is not safe to use and must be repaired.

Hitting an object-If the snow thrower accidentally strikes an object, stop the snow thrower. Inspect for damage;
repair or replace any damaged part before restarting and operating the snow thrower.

Discharge chute safety -Never direct the snow discharge chute at the operator, at bystanders, at vehicles or at
windows. Thrown snow and foreign objects accidentally picked up by the snow thrower can cause serious
damage and personal injury. Do not use your hands to unclog the discharge chute. Stop the motor before
removing debris.

Abnormal operation-If you notice the snow thrower running in an unstable state or hear abnormal sounds from
machine，stop the machine, disconnect the power immediately, and contact your original distributor.

Noise control-When using the snow thrower, you must respect local laws and regulations regarding noise
control and environmental protection. To avoid noise disturbance, you should carefully decide upon an
appropriate operation time and consider the surrounding conditions.

When work is completed -Disconnected the snow thrower from the power source when not in use, when
changing accessories, and before performing any maintenance.

Store safety-Store snow thrower indoors in a dry area between uses. Keep in a locked area where children and
unauthorized users can not gain access. Do not store the machine while it is still connected to the power source.
It may cause damage and injury.

Maintain for safety and longevity-Check for misalignment or binding of moving parts, breakage of parts, and
any other conditions that may affect the units operation. If damaged, repair or replace the damaged part before
use. Use only those replacement parts made for your model. When replacing any parts, you must strictly
observe the instructions and procedures described in this manual. Special care should be paid to any rubber
parts, since these parts may increase the engine load and decrease its mechanical power if damaged.
6