DFI NB30-EC Manual Del Usuario página 38

2
English
• The 5VSB power source of your power supply must
Wake-On-USB Keyboard
The Wake-On-USB Keyboard function allows you to use a USB
keyboard to wake up a system that is in the S3 (STR - Suspend To
RAM) state.
Important:
• If you are using the Wake-On-USB Keyboard function for 2
• If you are using the Wake-On-USB Keyboard function for 4
RTC Timer to Power-on the System
The RTC installed on the system board allows your system to
automatically power-on on the set date and time.
ACPI STR
The system board is designed to meet the ACPI (Advanced
Configuration and Power Interface) specification. ACPI has energy
saving features that enables PCs to implement Power Management
and Plug-and-Play with operating systems that support OS Direct
Power Management. Currently, only Windows
supports the ACPI function. ACPI when enabled in the Power
Management Setup will allow you to use the Suspend to RAM
function.
With the Suspend to RAM function enabled, you can power-off the
system at once by pressing the power button or selecting "Standby"
when you shut down Windows
to go through the sometimes tiresome process of closing files,
38
the password, power-off the system and remove the
battery. Wait for a few seconds and install it back before
powering-on the system.
support ≥ 720mA.
USB ports, the 5VSB power source of your power supply
must support ≥ 1.5A.
USB ports, the 5VSB power source of your power supply
must support ≥ 2A.
® ® ® ® ®
98SE/2000/ME/XP without having
® ® ® ® ®
98SE/2000/ME/XP