board.
Then hand in the printed board with lithium ion cell at an
accumulator/battery recycling point for proper disposal.
In line with the European Electrical and Electronic Equip-
ment Directive, after removing the printed board with
accumulator, you must deliver the appliance for environ-
mentally friendly recycling.
We would, however, also be happy to handle the proper
disposal of the appliance with accumulator on your
behalf. To take advantage of this offer, send the appli-
ance to the service address provided in the operating
instructions.
We, ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany, declare under our sole responsibility that the
product/s Accu Grass- and Shrub shear GBS 3,6 LI, to which this declaration relates correspond to the relevant
basic safety and health requirements of Directives 2006/42/EC (Machinery Directive), 2004/108/EC (EMV-Guide-
line), 2006/95/EC (Low Voltage Guideline), 2011/65/EU (RoHS-Guideline) and 2000/14/EC (noise directive) incl.
modifications. For the relevant implementation of the safety and health requirements mentioned in the Directives,
the following standards and/or technical specification(s) have been respected:
EN 60745-1/A11:2010, EN 60745-2-15/A1:2010, EN 55014-1/A1:2009+A2:2011, EN 55014-2/A2:2008
Charger:
EN 55014-1/A1:2009+A2:2011, EN 55014-2/A2:2008
EN 60335-1:2002+A11:2004+A1:2004+A12:2006+A2:2006+A13:2008+A14:2010
EN 60335-2-29:2004+A2:2010, EN 62233:2008
measured acoustic capacity level
guaranted acoustic capacity level
Conformity assessment method to annexe V / Directive 2000/14/EC
The year of manufacture is printed on the nameplate and can be additionally retrieved via the consecutive serial number.
Münster, 25.09.2014
Maintenance of technical documentation: Gerhard Knorr, Kärcherstraße 57, DE-64839 Münster
GB | Operating Instruction
EC Declaration of Conformity
87 dB (A)
92 dB (A)
Gerhard Knorr, Technical Management Ikra GmbH
GB-7