Ohyama WOOZOO SCD-130P Manual Del Usuario página 10

Black
How to use
Select the operating mode by pressing
the button
AUTO/ECO mode
• By pressing the AUTO/ECO mode, the cleaner
starts operating in the Auto mode. By pressing
the AUTO/ECO mode again, the cleaner starts
operating after switching to the ECO mode.
• The auto mode and ECO mode can be switched by
pressing the AUTO/ECO mode button.
• In the Auto mode, suction power is adjusted
according to the dust level detected by the dust
sensor.
• In the ECO mode, operating time in the Auto mode
becomes longer as the soft roller brush is not
rotating.
* When the cleaner is used for cleaning a carpet,
bedding, etc., the cleaner may operate continuously
with higher suction power in order to detect loose
hair and house dust inside the cleaner.
Dust sensor
• The light color on the back of the dust cup changes
according to the dust level detected by the dust
sensor. During operation in the AUTO/ECO mode,
the suction power changes in conjunction with the
change of the dust sensor's light color.
Dust level Light color
High
Medium
Low
Dust sensor
light (the back
of the dust cup
illuminates)
Suction power
Red Strong
Yellow Strong
Green Weak
Normal/Turbo mode
• By pressing the Normal/Turbo mode, the cleaner
starts operating in the Normal mode. By pressing
the Normal/Turbo mode again, the cleaner
switches to the Turbo mode and starts operating.
The Normal/Turbo mode can be switched by
pressing the Normal/Turbo mode button.
• Switch the Normal/Turbo mode by referring to the
light color as a guideline.
Cleaning
Floor, etc.
• Move the floor head back and forth to Vacuum the
dust.
• To clean a tatami mat, move the floor head along
the mat's grain.
Press the OFF button to stop operating
the cleaner when cleaning is complete
10
EN
SCD-130P