Cleaning the door seal
Clean the door seal with a soft cloth at least once a month. Make sure
that the device is always closed airtight.
Cleaning the device in the event of excessive ice build-up
Pull the mains plug out of the socket.
Open the door.
Remove the bottles.
The device slowly starts defrosting.
Collect the dripping water that runs off through the open door in a sui-
table container.
After defrosting, wipe out the inside of the device with a damp cloth and
a little detergent if necessary.
Clean the wire grid shelf with a bit of detergent.
Clean the glass door with a standard glass cleaner.
Dry the device and all parts with a soft cloth.
Device maintenance
107