en
en
For some models:
10 Whisk with gear
11 Masher attachment with gear
12 Universal cutter XL with lid
13 Universal cutter L with lid and
ice crush blade
14 Multifunction accessory with tools
15 Multifunction accessory with tools
and dicer
If the universal cutter is not included with
the hand blender, it can be ordered from
customer service (order no. 753122).
With the universal cutter use the appliance
at full power to prepare honey spread
(according to the recipe).
You can find the recipe in the operating
instructions of the universal cutter.
Place the lid on the universal cutter to keep
in the processed ingredients.
Operation
The appliance is suitable for blending
mayonnaise, sauces, mixed drinks,
baby food, cooked fruit and vegetables.
For puréeing soups.
Use the universal cutter for cutting/chopping
raw food (onions, garlic, herbs)!
It is recommended to use the supplied blender
jug. However, other suitable receptacles can
also be used.
Warning!
The bottom of the receptacle which you use
must not have any bumps or recesses.
Before using the appliance for the first
time, clean all parts of it.
Fig.
Completely unwind the power cord.
Place the blender foot on the base unit
and lock into position.
Insert the mains plug.
Place food in the blender jug or another
tall receptacle.
The appliance works better if there is some
liquid in the ingredients.
Set the required speed with the speed
control (Fig.
-5).
It is recommended to use a low speed
setting for liquids, hot food and for mixing
(e.g. muesli in yoghurt). The high speed
settings are recommended for the
processing of more solid foods.
Firmly hold the hand blender and jug.
10
10
Switch on the hand blender by pressing
the required On button.
When switching on the hand blender, hold
it at a slight angle to prevent it from
"sticking" to the bottom of the blender jug.
The hand blender remains switched
on as long as the On button is pressed.
To prevent the ingredients from splashing,
do not press the On button until the blender
foot has been immersed in the ingredients.
Always switch off the hand blender before
taking it out of the processed food.
Release the On button after processing.
After using the appliance:
Remove mains plug.
Press the release buttons and remove
the blender foot from the base unit.
Cleaning
Important information
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
Electric shock risk
Never immerse the base unit in liquids and
do not clean in the dishwasher.
Before cleaning the appliance, pull out the
mains plug! Do not use a steam cleaner!
Warning!
Surfaces may be damaged.
Do not use abrasive cleaning agents.
If processing e.g. red cabbage or carrots,
the plastic parts will become discoloured
by a red film which can be removed with
a few drops of cooking oil.
Pull out the mains plug!
Wipe the base unit with a damp cloth and
then wipe dry.
Blender jug and lid can be washed in the
dishwasher.
Clean the blender foot in the dishwasher
or with a brush under running water.
Dry the blender foot in an upright position
(blender blade face up) so that any
trapped water can run out.
Note:
Appliances with spiral cable:
Never wind the cable around the appliance!
Robert Bosch Hausgeräte GmbH