LIMIT 1210 HV Manual De Instrucciones página 3

LIMIT 1210 HV
Rotating laser with visible light for use both outdoors and indoors. Motorized automatic self-
leveling both horizontally and vertically. The laser has following features.
Scan Mode
Dot mode.
Manual mode. and Manual-Slope mode
Tilt mode.
Calibration function.
Contents: Laser, Remote control, Laser Receiver with clamp, Wall mount bracket, Rechargeable
battery pack with charger and manual.
Technical Specification:
Operation distance (Radius) m
Accuracy Horizontal
Vertically
Self-leveling range
Rotation Speed Sequence: rpm
Remote distance max
Dust/Waterproof
Operation time
Operating temperature
Storage temperature
Weight
Laser diodes Class 2 1mw 635nm.
Security. Do not look directly into the laser beam. It can cause devastating damage to eyes.
Therefore, do not set the instrument at eye level.
Before use. Check that instrument settings have not been disturbed during transportation or if the
instrument has fallen to the ground. The accuracy of your work is completely your responsibility
and you should regularly check your instrument. See control below.
Care and handling. This is a precision instrument and should be treated accordingly. Avoid
shock, drop and vibration. Always transport the laser in its plastic case. Use and store the laser
within the specified temperature range. Always keep the laser dry. Do not let a wet instrument lie
in carrying case longer. Remove the batteries if the laser and accessories will not be used for a
long time. Clean with a soft, dry cloth. Remove the batteries if the laser is to be used for a long
time.
Horizontal. Press
. The laser will always start with automatic self-leveling. The laser flashes
while auto-leveling progress. Then the LED is on constantly and the laser begins to rotate.
Vertically. Place the laser with the handle up. Either on the ground or with the wall bracket.
Press . The laser starts 0 rpm. Press
Shutdown. Press to shutdown the laser when it is on.
Automatic self-leveling. The laser will always start with automatic self-leveling. Stops and
200
± 1 mm/10m
± 1.5 mm/10m
± 5 ⁰
300-600-0 (in horizontal direction)
0-300-600 (in vertical direction)
m 30
IP 54
hours 24
⁰ C -10 ... +40
⁰ C -20 ... +60
kg 2.0
to start the rotation.
3
English