HOMCOM 820-333V90 Manual De Usuario página 31

1. Fasten four hook racks with eight screws(M4*6) (Picture 1).
2. Keep enough distance between the heater, floor and wall (Picture 2).
3. Use the drill dimension paper to drill the top two holes (Φ8) into the wall. Put the
plastic expansion tube in the holes, then fasten the expansion screws (ST4*40)
(Picture 3).
4. Hang the top two hook racks on the screws (ST4*40) (Picture 4). Mark the position
for the two bottom hook racks on the wall. Remove the heater and drill two bottom
holes (Φ8) into the wall, then put the plastic expansion tube into the holes (Picture
4).
5. Hang the heater on the wall and put the expansion screws (ST4*40) in the bottom
two holes (Picture 5).
Freestanding
1 – Place the feet onto the bottom of the body.
2 – Fasten the feet with four screws (ST4*35).
Control panel:
There are five buttons on the control panel:
-------Power/standby
------ Date and time settings, timer settings and changing the mode
------Select running mode and set programme
------Increase
------Decrease
Screen:
1. Clock
2. Date
3. Program name/ number
4. Target temperature
5. Comfort
6. Economy
7. Anti-frost
INSTRUCTIONS FOR USE
8. Stand by
9. Buttons locked
10. Heating symbol
11.Program setting
12.Timer
13. Day settings
14.Hour of the day
31