Publicidad
Idiomas disponibles
Idiomas disponibles
LED INDICATOR
The LED indicator will behave differently with each function.
Function
Input
The LED will blink a different color for
Bluetooth
The LED will blink blue when
searching and turn solid once a device
Pairing
DTS
TruVolume
On/Off
Virtual X
On/Off
Mute
If muted, the LED indicator will slowly pulse.
*Note：The LED will be lit pink for 3 seconds when Dolby Digital decoding, then 3 seconds linear fade to dark.
LED Behavior
each input.
is paired successfully.
one Ding tone：On
two Ding tone：off
one Ding tone：On
two Ding tone：off
Press the INPUT button on the remote to cycle through the available inputs.
Specific inputs will show a different LED color:
• Analog 3.5mm/ White LED: 1 blink
• Bluetooth/ LED color: Blue
Press and hold the INPUT button on the remote control for 4 seconds to
enable the auto input detect function.
Press and hold the
button on the sound bar. It will be discoverable for 15
minutes. You can now search for the sound bar using your Bluetooth device.
The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the sound bar.
Press the TVOL button to enable/disable TruVolume.
When enabled (On), TruVolume provides a consistent and comfortable
volume level for a more enjoyable listening experience.
Press the VRTX button to enable/disable VirtualX. When enabled (On), all
inputs will produce a virtual sound technology that simulates the effect of
having overhead sound. When disabled (Off ), all sources will playback in
stereo.
Press the Mute button to mute/unmute the sound bar.
Description
• Optical digital/ White LED: 2 blinks*
• USB/ White LED: 3 blinks
12
Publicidad
