Boston Acoustics TVee 22 Manual Del Usuario página 15

using the remote control learning function
If your TV is connected to the sound bar using the optical cable
and you are not able to control the volume of the sound bar with
your TV remote, you can use the Remote Control Learning
function to control volume and mute functions on your sound bar.
IMPORTANT: Hold both remotes about 12" (30 cm) directly in front
of the sound bar when pressing their respective buttons, and make
sure your remotes have fresh batteries.
Entering remote control learning Mode
Make sure your sound bar is powered on, then press and hold the input and Volume up button on the
sound bar for about 5 seconds. When you hear a two-note tone, release the button. You should now
see yellow light breath.
1. Select a button on your Boston sound bar remote.
Press and release the button on the Boston remote that you want to learn (ex: Volume Up).
You will hear a single tone and see yellow light pulsing.
2. Select a button on your TV remote.
Press and release the button on your TV remote that you want to assign to the button you
selected in Step 1.
3. Verify the results.
• If you hear a single tone and see green light, the command was successfully learned.
• If you hear a two-note tone and see red light, the command was not learned.
15
12" (30 cm)