StetSom STM 1003 Manual De Usuario página 22

Output and Controls
MAIN OUT
10
It has two RCA connectors and one P10
connector. This output carries the mixed
signals from all the channels.
It has a 60mm sliding level (MAIN LEVEL)
that allows you to adjust the overall volume
(L + R) which will be sent to the console's
outputs (AUX OUT and MAIN OUT).
AUX OUT
11
It has two RCA connectors and one P10
connector. This output carries the mixed
signals from all the channels.
It has a rotary control (AUX LEVEL) which
you can use to adjust the signal level that
will be sent to the AUX OUT output.
This output also has a rotary control for
phase adjustment (AUX PHASE) which
allows you to adjust the phase of the signal
from 0º to 180º.
The volume from this output depends on
the main volume (MAIN LEVEL).
VU
12
You can monitor the signal strength of the
MAIN OUT output by watching the LEDs.
22
10
11
12
10