StetSom STM 1003 Manual De Usuario página 28

Lock/Unlock Keys
The TXM control has a lock to prevent the control keys from being accidently
pushed. Follow these steps to lock and unlock the keys of your control:
1. Press the POWER
2. Press the SOURCE
LED on the control will blink 2 times indicating that the control is locked or it will
blink 5 times indicating that the control has been unlocked.
Synchronization of the STM 1003
The STM 1003 and its TXM control are SYNCHRONIZED at the factory. If the owner
purchases new TXM controls to use with the STM 1003, whether to replace the
current control or to have more than one control, follow these steps:
Note: Before beginning the synchronization, make sure there are no
other TXM controls operating within the range of the STM 1003 as
they could interfere.
1. Press the SYNC/RST key on the rear panel
of the STM 1003. The sound mixer's LED
will blink for 15 seconds.
2. Press one of the TXM control's keys
(except the POWER key)
3. The LED of the STM 1003 wil stop blinking.
Sync is complete.
To synchronize more than one control (maximum 8), repeat steps 1 to 3. If more
than 8 controls are synchronized, the newest control will override the oldest
control.
28
button. The control's transmission LED will remain on.
and MUTE keys at the same time. The transmission
SYNC/RST Key LED Indicator
Press one of the
keys.