HITWAY BK5 Manual Del Usuario página 9

Display Interface:
Instructions:
-On/off
Press the power button to turn on and off the machine, press the button, the locked
position is the power on state, press again, the button bounces out position is off.
-Switch gears
Short press (<1 second) the function button to switch the speed gears. There are 3
gears (MODE 1:1, MODE 2:2,MODE 3: 3 gears).
-Switch the display content of the mileage area
The single mileage is displayed by default after power-on. Long press (>3 seconds)
the function button to cycle through the display content of the mileage area.
Single mileage (TRIP) -> accumulated mileage (ODO) -> fault code (ERR) -> battery
voltage (UXX.X).
Note: Each time you turn off the machine and turn it on again, the single mileage will
be reset to zero, and the accumulated mileage will continue to accumulate.
-Fault code display
When a fault is detected, the "ERR" icon will be displayed. At this time, press and
hold the function button (>3 seconds) to switch the check.
Look at the current fault code, please refer to the attached table for the meaning of
the fault code.
English / German / French / Spanish / ltalian / Dutch / Polish
(6)