DeWalt DW089 Manual De Instrucciones página 28

DW 089/ D W089CG
THE DETECTOR'S SPEAKER MAKES NO SOUND
E
• Ensure that the detector is on.
• Press the volume button. It will toggle on and off.
• Ensure that the laser is turned on and that it is emitting a laser
• If the detector is still not making any sound, take it to a D
THE DETECTOR DOES NOT RESPOND TO THE BEAM FROM ANOTHER LASER
UNIT
• The D
THE DETECTOR GIVES OFF A TONE BUT THE LCD DISPLAY WINDOW DOES NOT
FUNCTION
• If the detector is very cold, allow it to warm up in a heated area.
• If the LCD display window is still not functioning, take the detector
BRIGHT LIGHT SHINING ON DETECTOR CAUSES CONTINUOUS "ON-GRADE"
SIGNAL
• In the presence of very intense ambient light, the detector may give
• Reposition the detector out of the intense light or shade the sensor
Optional Accessories
Using the Laser with Accessories (fig. 1 inset)
The laser is equipped with a 1/4" x 20 female thread (i) on the bottom
of the unit. This thread is to accommodate current or future D
accessories. Only use D
product. Follow the directions included with the accessory.
Consult your dealer for further information on the appropriate
accessories.
26
DW089_DW089CG - User Manual - NA - May 2018.indd 26
beam.
service centre.
WALT Digital Laser Detector has been designed to work
e
only with the DW088 and the DW089 and certain other compatible
line lasers.
to a D WALT service centre.
e
a false or erratic indication of level.
window (u) to resume normal operation.
WALT accessories specified for use with this
e
WALT
E
WALT
e
5/25/2018 10:40:49 AM