Stanley FATMAX FMHT82565-0 Manual De Instrucciones página 12

EN
User Manual
To avoid electric shock, make sure the probes are
disconnected from the measured circuit before
removing the rear cover. Make sure the rear cover is
tightly screwed before using the instrument.
Replacing The Batteries
To avoid electric shock, make sure that the test leads
have been clearly move away from the circuit under
measurement before opening the battery cover of the
meter.
Do not mix old and new batteries. Do not mix alkaline,
standard (carbon-zinc), or rechargeable
(ni-cad, ni-mh, etc) batteries.
5.1.1 If the sign "
should be replaced.
5.1.2 Loosen the fixing screw of the battery cover and remo-
ve it.
5.1.3 Replace the exhausted batteries with new ones.
5.1.4 Put the battery cover back and fix it again to its origin
form.
Note:
Do not reverse the polarity of the batteries.
12
WARNING
WARNING
WARNING
" appears, it means that the batteries
R-00-05-XXXX