Sony BKM-FW31 Manual De Instrucciones página 21

FWD-50PX1N: Loosen the two screws
located on the top and bottom of the
panel cover. Use a Philips
screwdriver to turn the screws
counterclockwise, and then remove
the panel cover.
When the option slot is located
on the right side*
1
1
* The location of the option slot differs
depending on the model of the Display
Unit. Refer to the Instruction Manual of
the FWD series as well.
2
Check the direction (top/bottom) of
this device and insert it into the flat
panel display. Make sure that the
connector inside the display is firmly
connected.
Using a slot screwdriver, tighten the
two screws of this device. Connect the
LAN cable, as needed.
2
Caution
Do not touch the connectors in the Display.
Doing so may result in injury to yourself or
cause this device to malfunction.
Preparations for Using the Networking Function
2
1
7
GB