Manuales relacionados para Truper PISCA-AM
Resumen de contenidos para Truper PISCA-AM
- Página 1 Manual Mini Heat Gun 350 W Power Applies for: Code Model 102578 PISCA-AM PISCA-AM Read this manual thoroughly CAUTION before using the tool.
- Página 2 Manual before Parts using the tool. Start up Keep this manual for future references. Maintenance The illustrations in this manual are for reference Authorized Service Centers only. They might be different from the real tool. Warranty policy PISCA-AM ENGLISH...
- Página 3 Technical data PISCA-AM Code 102578 Description Mimi heat gun Voltage 127 V Frequency 60 Hz Current 2.9 A Power 350 W Air flow 280 LPM Temperature 752 °F Work cycle 30 minutes of work and 15 minutes of rest. Daily maximum 3 hours.
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety warnings for the use of heat guns There is a risk of fire if the appliance is not used with care, therefore it is necessary that: CAUTION • Take care when using the appliance in places where combustible materials are present. •...
- Página 6 Parts Handle Retractable support outlet Power cord Cord Ventilation protection slots Switch Hook nozzle for pipe welding ENGLISH...
- Página 7 Start Up • The mini heat gun is useful for crafts, electronics projects, plastic welding (bonding, patching, vulcanizing tarps, etc.), removing decals and adhesives, loosening rusted or over-tightened metal nuts, softening old mastic for removal and replacement with new mastic, removing paint, thawing metal pipes, applying anti-assault film on automotive glass, drying paint, varnish, wet wood, etc.., fixing PVC shrink wraps, removing plastic automotive fascia’, removing adhesive floor coverings, etc.
- Página 8 Maintenance Cleaning and care • Always keep the vents clean and free of obstructions to ensure proper cooling of the motor. • Regularly inspect all mounting bolts and make sure they are tightened properly. If any of the screws are loose, tighten them immediately.
- Página 9 In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center. DE TODO PARA LA CONSTRUCCIÓN FIX FERRETERÍAS...
- Página 10 Phone number 800-018-7873. Made in China. Imported by Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Phone number 761 782 9100.