Manuales relacionados para Truper PRO PISCA-A
Resumen de contenidos para Truper PRO PISCA-A
- Página 1 Manual Heat Gun 2 000 W Power Applies for: Code Model 16432 PISCA-A PISCA-A Read this manual thoroughly CAUTION before using the tool.
- Página 2 Contents CAUTION Technical Data Power Requirements To gain the best performance of the tool, prolong the duty life, General Power Tool Safety Warnings make the Warranty valid if necessary, and to avoid hazards Safety Warnings for Heat Guns of fatal injuries please read and understand this Manual before Parts using the tool.
- Página 3 Technical Data PISCA-A Code 16432 Description Heat Gun Voltage 127 V Frequency 60 Hz Current 16 A Power 2 000 W Air Flow Level 1: 132 gpm - 158 gpm | Level 2: 185 gpm - 211gpm Temperature Level 1: 113 ºF - 392 ºF | Level 2: 113 ºF - 932 ºF Work Cycle 30 minutes work per 15 minutes rest.
- Página 4 General Power Tools Safety Warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety Warnings for Heat Guns Before Operating the Heat Gun After Operating the Heat Gun CAUTION • Take your time assessing the job and double-checking all • Wait until the heat gun cools down the caution measures before starting to operate the heat completely before storing it in a safe place away from the gun.
- Página 6 Parts Ventilation Temperature Slots control 500 ºC 45 ºC CONTROL DE TEMPERATURA Outlet Interchangeable nozzles connector Temperature air flow on/off slide switch Handle Stand Caulking Sheets Power Cord Deflecting Nozzle Spraying Nozzle Reduction Nozzle Hook Nozzle Caulking Sheets Handle Putty knife ENGLISH...
- Página 7 Preparation Placement of nozzles CAUTION • Wait until the air outlet cools down completely before inserting or changing a nozzle. • The nozzle are pressed onto the nozzle connector until they meet the backing of the air outlet tube. Nozzle Nozzle connector •...
- Página 8 Start Up Temperature control • To increase the temperature turn the temperature regulator clockwise; to decrease the temperature turn it counterclockwise. 500 ºC 45 ºC CONTROL DE Flow and temperature parameters TEMPERATURA • According to the slide switch for on/off and the temperature regulator, the following parameters can be obtained in order to get the best result on your work.
- Página 9 Notes ENGLISH...
- Página 10 Notes ENGLISH...
- Página 11 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
- Página 12 It includes the costs of transportation of the product that derive from its fulfillment of its service network. . Phone number 800-018-7873. Made in China. Imported by Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Phone number 761 782 9100.