Publicidad
Idiomas disponibles
Idiomas disponibles
AIR FILTER
Before using the brush cutter, check the air filter Fig19. Being clogged, will reduce the engine
performance.
Remove the air filter cover by undoing the cover screw Fig 18, clean the filter element in warm, soapy
water, dry completely before installing. If the element is broken or shrunk, replace with a new one.
FIG 18 AIR FILTER COVER SCREW
CARBURETTOR
·The carburettor mixture setting has been set at the factory and will not need adjusting.
·Adjusting the idle speed Fig 20, if adjustment is necessary turn the T screw clock wise (2) until the blades
start to move, then turn the screw T anticlockwise (3) until the blades stop.
Fig 20
T screw
· If the idle speed cannot be adjusted to stop the cutting head moving at idle, contact your dealer for
repair before use.
Fig 19 AIR FILTER
Fig 21
THROTTLE LEVER
14（GB）
SAFETY LOCK
Publicidad
