Publicidad
Connecting Power
This section describes how to power the AP in the following ways:
By Power over Ethernet (PoE) supplied over the LAN by an 802.3af PoE
compliant device such as a switch.
By PoE supplied by a PoE injector or midspan (not included with the AP).
:The PoE injector needs to be separately purchased.
Power over Ethernet (PoE) from the LAN
To power the AP using PoE provided by a switch or other 802.3af compliant device,
plug the network cable from the device into the AP's Ethernet port.
Power over Ethernet from a PoE Injector
To power the AP using a PoE injector or midspan (not included), follow these steps:
1) Connect the LAN cable from a switch to the Switch port on the PoE injector.
2) Connect a LAN cable from the Ethernet port on the AP to the other LAN port
on the PoE injector.
3) Plug the PoE injector into a properly grounded electric outlet. See the
illustration.
8
Publicidad
