Publicidad
Idiomas disponibles
Idiomas disponibles
EN
5.
Discard the box and packing material in
compliance with local regulations.
For your personal safety, do not insert battery before
the tool is assembled completely.
7.2
UNFOLD AND ADJUST THE LOWER
HANDLE
1.
Pull up and back the lower handle (4) to operation
position. Make sure that the handles click into
position correctly.
2.
Tighten the lower handle with the quick-release
levers (8) on the two sides.
Make sure that the two handles are in the same
position.
Do not make damage to the cables when you fold or
unfold the handle.
7.3
INSTALL THE UPPER HANDLE
3
12
4
WARNING
8
4
NOTE
WARNING
12
13
English
1.
Align the holes in the upper handle (3) and the
lower handle (4).
2.
Put the cam locks (12) through the holes.
3.
Tighten the knobs (13) onto the cam locks.
4.
Do the same operation on the other side.
7.4
INSTALL THE GRASS CATCHER
1.
Remove the mulch plug.
2.
Open the rear discharge door (5) and hold it.
3.
Hold the the grass catcher (9) by its handle and
put the hooks over the slots (12).
4.
Close the rear discharge door.
7.5
INSTALL THE MULCH PLUG
1.
Remove the grass catcher.
2.
Open the rear discharge door (5) and hold it.
3.
Hold the mulch plug (10) by its handle and fit it in
the discharge chute.
4.
Close the rear discharge door.
10
5
9
14
5
10
Publicidad
