Dimplex Pro Range Manual De Instrucciones página 8

Manual Mode - To choose a constant heat mode. This mode ignores the User Timer and maintains the displayed
temperature.
• Press Menu Button
• Press < or > to highlight the
• Press Enter to Confirm
• Use < and > to adjust to the desired temperature
Frost protect - Frost protect mode maintains a room temperature of 7°C throughout a 24 hour period. This mode should
be used to provide protection against frost as indicated by the Frost icon.
• Press the Menu button
• Press < or > to highlight the
• Press Enter to confirm
• Press < or > to exit this mode and enter manual mode.
Getting the Desired Flame Effect
1. With the remote control activated, OFF on the display will be flashing, navigate UP button to flash FIRE and press
ENTER. The current setting will be displayed. Press < or > to toggle between F1 and F6. F1 being the lowest setting
and F6 being the highest setting.
2. Generally the flames appear more realistic when the flame control is turned down.
3. Give the flame generator time to react to changes you may make.
4. The fire will use less water if the flame effect is set to a lower level.
5. Do not tilt or move the fire while there is water in the tank or sump.
6. Make sure that the fire is on a level floor.
Customising the display
The maximum temperature set point on the product is 30°C You have the option to reduce this set point. You can also
change °C to °F
1. Press the Menu button.
2. Press < or > to navigate to
3. Press Enter to confirm.
4. Press and hold MENU button until °C and °F. displayed
5. Press < or > to select between °C and °F. Press ENTER to confirm.
6. Press < or > to choose your maximum temperature set point.
7. Press BACK button to return to the home screen.
Hand icon
snowflake icon
symbol flashes.
6