Sammic OS-140P Manual De Instrucciones página 30

EN
3.1 RECOMMENDED INSTALLATION OF THE WASTEWATER DRAIN
1. Drain pipe
2. Drain bracket
3. Drain bracket adjustment bolt
4. Outlet pipe adjustment nut
5. ¼" outlet pipe
6. ¼" non-return valve
Install the drain bracket on the sink drain pipe.
Check that the bracket rests correctly on the pipe and that the screws are correctly
tightened.
Remove the adjustment nut from the outlet pipe.
Using a 6 mm bit, drill the drain pipe and fit a connector.
Insert the pipe into the connector and fit a non-return valve at the end of the pipe.
Connect the osmosis unit outlet pipe to the non-return valve (material not included).
5
1
4
2
3
6
- -
30