Dirt Devil DD7001 Manual De Instrucciones página 6

ASSEMBLING THE MULTIFUNCTIONAL STEAM MOP
Extension pole
1. Insert threaded connector on bottom of Extension Tube base on
main unit.
2. To disassemble Extension Tube :
1) Press down the release button, make the buckle on tube
retract.
2) Pull out the tube carefully.
Mop head
1. Align Mop Head with main unit as shown, so that neck is in line
with Steam Nozzle.
2. Slide Mop Head neck into Steam Nozzle, pressing firmly unit
release until release button snaps through hole.
3. To remove Mop Head, press firmly on release button while
simultaneously pulling Mop Head away from Steam Nozzle.