Dirt Devil DD7001 Manual De Instrucciones página 7

Concentration nozzle
CAUTION: Metal tip of Concentration nozzle becomes hot during
use. Do not touch tip to avoid burns.
1. Align Concentration nozzle with Steam Nozzle as shown below.
2. Slide Concentration nozzle into Steam Nozzle, pressing firmly unit
release button snaps through hole.
3. To remove Concentration nozzle, press firmly on release button
while simultaneously pulling Concentration nozzle away from
Steam Nozzle.
Small round brushes
CAUTION: Metal tip of Concentration nozzle becomes hot during
use. Allow Concentration nozzle to cool for at least 5 minutes
before attempting to connect/disconnect a Small round brush.
1. Align Small round brush with tip of Concentration nozzle and press
it firmly on as far is it will go.
2. Align Vertical tool with tip of Concentration nozzle and press it
firmly on as far is it will go.
Microfiber pads
1. Hold the rectangular floor brush steadily, put the microfiber pad on it.
2. Using your foot, hold the corner of the microfiber pad down, lift
steamer to peel away.