Publicidad
Idiomas disponibles
Idiomas disponibles
Connections & Indicators
LEDs
The LED indicators make it easier to monitor
the switch and its connections. NOTE: Ports
2 – 5 can provide power to a connected
powered device, and all powered devices
should comply with IEEE 802.3at/af.
Ports
All RJ45 ports on the switch support
Auto-MDI/MDI-X functionality, so you can
use straight or crossover UTP/STP cables
to connect the RJ45 ports to PCs, routers, hubs, other switches, etc. Cat5e/6
cables provide optimal performance; if a status LED doesn't indicate a link or
activity, check the corresponding device for proper setup and operation.
Power
Use the included power adapter (51 VDC) to connect the receptacle on the
back of the switch to a power outlet, and confirm that the Power LED lights.
Installation
Desktop
Prior to use, it is recommended that the switch be placed/positioned: on
a level surface that can support the weight of the switch; with at least
25 mm (approx. 1") of clearance for ventilation; away from sources of
electrical noise (radios, transmitters, broadband amplifiers, etc.); within
100 m (approx. 328') of network devices it's to be connected to.
Wall Mounting
First, install screws (not included) into the wall at appropriate distances.
Then, hang the unit on the screws and slide it into place so it is secure.
Chassis Ground Column (Side Panel)
Wire the grounding terminal to an earth grounding object to
protect equipment from external electrical surges.
For specifications, visit intellinet-network.com. Register your product at register.
intellinet-network.com/r/561228 or scan the QR code on the cover.
2
English
LED
Status
Status Description
Off
Power Off
Power
On
Power On
Off
No link established.
On
Valid port connection.
Link/Act
Flashing Sending or receiving data.
No PD is connected
Off
to the port.
PoE
The connected device
On
is receiving power.
Instructions
Publicidad
